1 0

    Siemens - 6ES7143-6BH00-0BB0

    Siemens - 6ES7143-6BH00-0BB0

    €240,93 EUR
    €240,93 EUR
    Sale Sold out

    44 in stock

    SIMATIC ET 200eco 16 DIQ DC 24V/0.5A/2A M12-L 8x M12 PN

    <
    General information
    HW functional status FS05
    Firmware version V5.1.x
    FW update possible Yes
    Vendor identification (VendorID) 002AH
    Device identifier (DeviceID) 0306H
    Manufacturer ID according to ODVA (VendorID) 04E3H
    Device ID according to ODVA (Product code) 0FA8H
    Product function
    I&M data Yes; I&M0 to I&M3
    Isochronous mode No
    IRT Yes
    Prioritized startup Yes
    Engineering with
    STEP 7 TIA Portal configurable/integrated from version STEP 7 V17 or higher with HSP 0363
    PROFINET from GSD version/GSD revision GSDML V2.3.x
    Multi Fieldbus Configuration Tool (MFCT) from V1.3 SP1
    Operating mode
    DI Yes
    Counter No
    DQ Yes
    MSI Yes
    MSO Yes
    Supply voltage
    power supply according to NEC Class 2 required No
    Load voltage 1L+
    Rated value (DC) 24 V
    permissible range, lower limit (DC) 20.4 V
    permissible range, upper limit (DC) 28.8 V
    Reverse polarity protection Yes; Against destruction; encoder power supply outputs applied with reversed polarity, loads pick up
    Load voltage 2L+
    Rated value (DC) 24 V
    permissible range, lower limit (DC) 20.4 V
    permissible range, upper limit (DC) 28.8 V
    Reverse polarity protection Yes; against destruction
    Input current
    Current consumption (rated value) 90 mA; without load
    from load voltage 1L+ (unswitched voltage) 12 A; Maximum value
    from load voltage 2L+, max. 12 A; Maximum value
    Encoder supply
    Number of outputs 8
    24 V encoder supply
    Short-circuit protection Yes; Group-by-group for 2 channels, electronic
    Output current, max. 100 mA; per output
    Power loss
    Power loss, typ. 9.7 W
    Address area
    Address space per module
    Inputs 2 byte; + 4 bytes for QI information
    Outputs 2 byte
    Hardware configuration
    Submodules
    Number of configurable submodules, max. 2
    Digital inputs
    Number of digital inputs 16; Parameterizable as DIQ
    in groups of 8
    Digital inputs, parameterizable Yes
    Source/sink input P-reading
    Input characteristic curve in accordance with IEC 61131, type 3 Yes
    Number of simultaneously controllable inputs
    all mounting positions
    up to 60 °C, max. 16
    Input voltage
    Rated value (DC) 24 V
    for signal "0" -3 to +5V
    for signal "1" +11 to +30V
    Input current
    for signal "1", typ. 2.4 mA
    Input delay (for rated value of input voltage)
    for standard inputs
    parameterizable Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms
    Cable length
    unshielded, max. 30 m
    Digital outputs
    Number of digital outputs 16; Parameterizable as DIQ
    in groups of 8; 2 load groups for 8 outputs each
    Current-sourcing Yes
    output type acc. to IEC 61131, type 0.5 Yes
    output type acc. to IEC 61131, type 2 Yes
    Short-circuit protection Yes; per channel, electronic
    Response threshold, typ. 0.5 A: 1 A / 2 A: 3 A
    Limitation of inductive shutdown voltage to 0.5 A: Type 1L+ (-70 V) / 2 A: Type (-18 V)
    Controlling a digital input Yes
    Switching capacity of the outputs
    with resistive load, max. 0.5 A / 2 A
    with inductive load, max. 0.5 A / 2 A
    on lamp load, max. 0.5 A: 5 W / 2 A 10 W
    Load resistance range
    lower limit 0.5 A: 48 ohms / 2 A: 12 ohms
    upper limit 4 k¦
    Output voltage
    for signal "1", min. 1L+ (-0.8 V) / 2L+ (-0.8 V)
    Output current
    for signal "1" rated value 0.5 A / 2 A
    for signal "1" permissible range, max. 0.5 A / 2 A
    for signal "0" residual current, max. 0.1 mA
    Output delay with resistive load
    "0" to "1", max. 0.5 A: 100 µs / 2 A: 150 µs; at rated load
    "1" to "0", max. 0.5 A: 150 µs / 2 A: 2.5 ms; at rated load
    Parallel switching of two outputs
    for uprating No
    for redundant control of a load Yes
    Switching frequency
    with resistive load, max. 0.5 A: 100 Hz / 2 A: 40 Hz
    with inductive load, max. 0.5 Hz
    on lamp load, max. 1 Hz
    Total current of the outputs
    Current per group, max. 1L+: 2 A / 2L+: 6 A
    Current per module, max. 8 A
    Cable length
    unshielded, max. 30 m
    Encoder
    Connectable encoders
    2-wire sensor Yes
    permissible quiescent current (2-wire sensor), max. 1.5 mA
    Interfaces
    Transmission procedure 100BASE-TX
    Number of PROFINET interfaces 1
    1. Interface
    Interface type PROFINET with 100 Mbit/s full duplex (100BASE-TX)
    Interface types
    M12 port Yes; 2x M12, 4-pin, D-coded
    Number of ports 2
    View full details